| Specification |
Unit |
CP6½50L |
CP6½66L |
CP6½76L |
| Swing over bed |
mm |
Φ500 |
Φ660 |
Φ760 |
| Swing over cross slide |
mm |
Φ300 |
Φ430 |
Φ530 |
| Distance between centers |
mm |
1000,1500,2000,3000,4000,5000 (4000 & 5000 only for CP61 series) |
| Swing in gap |
mm |
710 |
870 |
970 |
| Width of gap |
mm |
240 |
240 |
240 |
| Width of bed |
mm |
390 |
| Spindle nose |
|
D8 |
| Spindle bore diameter |
mm |
Φ105 |
| Morse taper of spindle center |
|
1:20 |
| Spindle speed |
rpm |
6-1120 (24 steps) |
| Max output torque of spindle |
N.m |
1500 |
| Range of longitudinal feed |
mm/rev |
0.063-6.43 (0.0025-0.25in/rev) |
| Range of cross feed |
mm/rev |
0.027-2.73 (0.00106-0.107in/rev) |
| Lead screw pitch |
|
12mm(metric system)/2 t.p.i(inch system) |
| Metric threads |
mm |
1-224 (46 kinds) |
| Inch system threads |
t.p.i |
28-1/8 (42 kinds) |
| Module threads |
|
0.5-112mm (42 kinds) |
| Diameter pitch threads |
|
56-1/4DP (45 kinds) |
| Cross slide travel |
mm |
340 |
340 |
| Top slide travel |
mm |
150 |
150 |
| Section specification of tool post |
mm |
25×25 |
| Longitudinal rapid traveling speed |
m/min |
4.5 (50Hz) / 5.4 (60Hz) |
| Transversal rapid traveling speed |
m/min |
1.9 (50Hz) / 2.3 (60Hz) |
| Morse taper of tailstock center |
|
M.T.#5 |
| Max travel of tailstock quill |
mm |
150 |
| Tailstock quill diameter |
mm |
75 |
| Main motor |
kW |
11 |
| Rapid travel motor |
|
250W/1360rpm |
| Coolant pump motor |
|
90W/25L/min |
| Standard Accessories: |
|
Optional Accessories |
|
|
| 1.Ø250mm 3-jaw chuck for 50B,50L series |
|
1.Ø630mm Face plate for 50 series |
7.4-position stop for saddle |
14.Digital readout(DRO) |
| Ø325mm 3-jaw chuck for 66B,66L,76L series |
|
Ø800mm Face plate for 66,76 series |
8.4-position stop for cross slide |
15.CE standard compliance |
| 2.Thread chasing dial |
|
2.Ø400mm 4-jaw chuck |
9.Micro stop for saddle |
16.Chuck cover |
| 3.Chip guard for L≤2m lathe |
|
3.Ø20-140mm Small steady rest |
10.Quick change tool post |
|
| Follow Chipe guard for L≥3m lathe |
4.Ø130-260mm Large steady rest |
11. Damping washer |
|
| 4.Footbrake |
|
5.Ø20-80mm Follow rest |
12.Taper turning attachment(TTA) |
| |
|
6.Ø250mm Drive plate |
13.Halogen work lamp |
|
| |
|
|
|
|
| Hercules Machinery Equipment Ltd. |
){kind=link}