| Customization: | Available |
|---|---|
| Type: | Horizontal Lathe |
| Processing Accessory: | Rotary part |
Suppliers with verified business licenses
| Specification | Unit | CP6½50L | CP6½66L | CP6½76L |
| Swing over bed | mm | Φ500 | Φ660 | Φ760 |
| Swing over cross slide | mm | Φ300 | Φ430 | Φ530 |
| Distance between centers | mm | 1000,1500,2000,3000,4000,5000 (4000 & 5000 only for CP61 series) | ||
| Swing in gap | mm | 710 |
870 |
970 |
| Width of gap | mm | 240 |
240 |
240 |
| Width of bed | mm | 390 | ||
| Spindle nose | D8 | |||
| Spindle bore diameter | mm | Φ105 | ||
| Morse taper of spindle center | 1:20 | |||
| Spindle speed | rpm | 6-1120 (24 steps) | ||
| Max output torque of spindle | N.m | 1500 | ||
| Range of longitudinal feed | mm/rev | 0.063-6.43 (0.0025-0.25in/rev) | ||
| Range of cross feed | mm/rev | 0.027-2.73 (0.00106-0.107in/rev) | ||
| Lead screw pitch | 12mm(metric system)/2 t.p.i(inch system) | |||
| Metric threads | mm | 1-224 (46 kinds) | ||
| Inch system threads | t.p.i | 28-1/8 (42 kinds) | ||
| Module threads | 0.5-112mm (42 kinds) | |||
| Diameter pitch threads | 56-1/4DP (45 kinds) | |||
| Cross slide travel | mm | 340 | 340 | |
| Top slide travel | mm | 150 | 150 | |
| Section specification of tool post | mm | 25×25 | ||
| Longitudinal rapid traveling speed | m/min | 4.5 (50Hz) / 5.4 (60Hz) | ||
| Transversal rapid traveling speed | m/min | 1.9 (50Hz) / 2.3 (60Hz) | ||
| Morse taper of tailstock center | M.T.#5 | |||
| Max travel of tailstock quill | mm | 150 | ||
| Tailstock quill diameter | mm | 75 | ||
| Main motor | kW | 11 | ||
| Rapid travel motor | 250W/1360rpm | |||
| Coolant pump motor | 90W/25L/min | |||
| Standard Accessories: | Optional Accessories | |||
| 1.Ø250mm 3-jaw chuck for 50B,50L series | 1.Ø630mm Face plate for 50 series | 7.4-position stop for saddle | 14.Digital readout(DRO) | |
| Ø325mm 3-jaw chuck for 66B,66L,76L series | Ø800mm Face plate for 66,76 series | 8.4-position stop for cross slide | 15.CE standard compliance | |
| 2.Thread chasing dial | 2.Ø400mm 4-jaw chuck | 9.Micro stop for saddle | 16.Chuck cover | |
| 3.Chip guard for L≤2m lathe | 3.Ø20-140mm Small steady rest | 10.Quick change tool post | ||
| Follow Chipe guard for L≥3m lathe | 4.Ø130-260mm Large steady rest | 11. Damping washer | ||
| 4.Footbrake | 5.Ø20-80mm Follow rest | 12.Taper turning attachment(TTA) | ||
| 6.Ø250mm Drive plate | 13.Halogen work lamp | |||
| Hercules Machinery Equipment Ltd. | ||||
){kind=link}